![]() Mirrors and other reflective surfaces such as TVs, monitors, or even windows will create a lot of reflections that can have a major impact on tracking accuracy. Cover Mirrors And Reflective Objects To Fix Beat Saber Tracking Issues If you are using a standalone headset, you could consider moving your playspace to another room that has more furniture, or features that may improve the tracking.Ĥ.Change your orientation in the room when you are playing so you are facing in the direction with more features.Putting a few pictures or posters on the walls, and placing a few objects around the room can make a massive difference to the tracking. Add some colorful features to your room.If you have bare walls and everything in the room is a similar color, your VR headset is really going to struggle to pick up on features it can use to track your headset and controllers effectively. Inside-out tracking relies on picking up features in your room and tracking them in relation to the movement of your headset. If you’ve got the lighting in your room perfect, but are still having tracking issues in Beat Saber, you should consider whether it could be caused by a lack of features in your room. Smudges or dirt on the cameras can cause Beat Saber tracking issues, so you should check each camera and ensure they are completely clean.Įnsure the cameras on your VR headset are clean 3. The tracking performance you experience in Beat Saber will only be as good as the ability of the tracking cameras to pick up the movement of the controllers and the headset within the room. If possible, turn off bright localized lighting and ideally use lights with shades, or softer lighting that illuminates the room evenly. Fairy lights, Christmas tree lights, RGB lighting, and LED spotlights can all interfere with tracking. ![]() They don’t even need to provide a lot of light, even small LED lights can cause major issues. If you have any bright sources of electric light in your room, these can significantly affect tracking in Beat Saber. Moderate lighting optimizes the contrast levels between the features in your room, making it easier for the cameras on your headset to determine the position and movement of the headset and controllers. VR headsets that use inside-out tracking work best in moderate, even lighting conditions. It is ideal to have moderate, diffuse lighting throughout your room, at a brightness that you could easily read in. Low LightingĪt the other end of the spectrum, low lighting can also affect tracking performance in Beat Saber. If this makes the room dark, you may need to turn on a light or two, but if the room remains reasonably well lit, you may be better off leaving the lights off. If you get a lot of direct sunlight through your windows, you are best to close the curtains or blinds when using your VR headset. ![]() Both can be affected by excessively bright light which is one of the reasons why the Quest 2 works poorly outside in direct sunlight. Some headsets have controllers that use infra-red lights, such as the Quest 2, while others use light in the visible spectrum, including WMR headsets such as the HP Reverb G2. Bright light prevents the cameras on your headset from being able to see the lights on the controllers, making it harder to track their movement. Most inside-out tracking systems use cameras on the headset and lights on the controllers to track their position in the room and position relative to each other. There are three ways that lighting can cause Beat Saber tracking issues. Get the lighting in your room set up perfectly before moving on to consider other causes. If you’re really struggling with poor tracking, don’t underestimate lighting issues as a major cause of problems. One of the most important things you can do to improve controller tracking in Beat Saber is to ensure that the lighting in your room is just right. ![]() Improve Lighting To Fix Beat Saber Tracking Issues
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |